Dual LS 260
Light screens for professional use
The lightscreen LS 260 is a unidirectional static Infrared lightscreen and has been created at first for indoor use. Through its light construction the LS 260 characterize itself for portable use. For transportation the lightscreen can be disassembled very fast to save space. The standard version of the lightscreens are working with calibers from .17 up to .50. Custom built solutions to solve special problems are possible.
In combination with our measuring systems BMC 31 respectively the light screen amplifier TLSA-100, the LS 260 light screen can be used in many ways.
Send requestUnder certain circumstances it can become necessary to measure two velocities parallel or sequentially to get demanded data (Information). The following list shows some examples of double measurements, but makes no claim to completeness.
- To make sure that the measurement is correct (backup measurement, reliability, redundancy)
- Important and/or not repeatable measurements
- QM guidelines and/or specifications
- Customers/Contractors wish or specification
- Customer specific test setup, that requires 2 velocities (e.g. before and after a target or a other special given problem)
- Calculationof the ballistic coefficient
- Required by law
- Forensic investigations
| Sensor area | 100 x 260 mm |
| complete shot area | 230 x 260 mm |
| Measuring base | 500mm Standard (can be changed) |
| Controller Outputs (TLSA100) | 5 Volt Analog 5 Volt Digital (Low active, High active) |
| Output connectors | RJ 45 |
| Power supply | from the connected measuring system |
| DC current input | 300 mA, ca. 3,6 Watt |
| Accuracy | 0.1 % |
| Speed Area | ca. 25 - 2000 m/s |
| Frame material | powder coated Duraluminium |
Delivery standard:
LS 100/260 incl. Aluframe, 4 pieces of Distance rod for 500 mm Measuring base, Mounting plate for Videotripod, Controller for Lightscreen LS 100vvGA , Power supply, cableset. Subject to change without notice !
Warranty: 36 Month
