Professional measurement technology, includes Rate of Fire
Double measurements:
Under certain circumstances it can become necessary to measure two velocities parallel or sequentially to get demanded data (Information). The following list shows some examples of double measurements, but makes no claim to completeness.
- To make sure that the measurement is correct (backup measurement, reliability, redundancy) - Important and/or not repeatable measurements
- QM guidelines and/or specifications - Customers/Contractors wish or specification - Customer specific test setup, that requires 2 velocities (e.g. before and after a target or a other special given problem)
- Calculationof the ballistic coefficient - Required by law - Forensic investigations
In all these cases our measuring systems offer solutions, supported by the miscellaneous possibilities of the BMC 21 software.
The BMC 21 is the newest generation of professional ballistic speed measurement Systems. It is a universal measuring system that combines flexibility, reliability, very high accuracy and very easy to use. The BMC 21 represents 25 years of experience in ballistic measurement.
The BMC 21a was developed for applications which require a maximum independence of a computer. The BMC 21a can store up to 250 measured values in a non-volatile memory. As soon as the system is connected to a computer, the measured values can be transmitted to the computer with the delivered software. With the supplied IR remote control, the BMC 21a can be used with all it's functions completely independent from a computer. Settings of the measuring base, gain, threshold, velocity in m/s or ft/s, sensor check, remote control test, deletion of the last measured values, deletion of the whole series, calculations as: Minimum value, maximum value, average, standard deviation, extreme spread, number of the measurements and and a lot more.
As a matter of course the BMC 21a can also completely be controlled from the PC.
The Possibilities:
Device control via IR remote control or PC-Software.
Single Shot and Full Auto mode measurements
Direct indication of velocity and energy.
Measurement of Rate of Fire via IR Remote control and PC-Software
The BMC 21a has a specially designed hardware, which makes it possible to get measurements without the main processor. This special hardware, together with the digital controlled light screen amplifiers allows the
BMC 21a it's unique accuracy. The extreme precise measurement clock of 40MHz makes a measurement resolution of 0.05m/s at a speed of 1000m/s possible.
